The New PS Audio FR10 Loudspeaker is introduced!

The New PS Audio FR10 loudspeaker delivers the sonic magic of the Aspen series in a smaller, more affordable form factor – Ideal for a Wide Variety of Listening Rooms and Systems

Boulder, Colorado, December 19, 2023PS Audio today announced the introduction of its Aspen FR10 loudspeaker, an elegant, slim 3-way floor standing tower that brings the extraordinary sound quality and innovative driver design of the Aspen series to a wider range of listening environments, systems, and budgets.
 
The new FR10 (SRP: $9,999 per pair, available now) features PS Audio’s acclaimed push-pull planar magnetic midrange and high-frequency driver technologies, complemented by ultra-low-distortion, linear-magnet woofers, high-excursion passive radiators, and a host of additional refinements. Like all the models in the Aspen series, the FR10 has a sleek, refined appearance.
 
Paul McGowan, PS Audio CEO noted, “The Aspen FR10 embodies more than 50 years of experience in audio in learning what works in a loudspeaker, and what it takes for a speaker to ‘disappear’ in a listening room and deliver a magical musical experience. Our goal with the Aspen FR10 was to offer no-compromise full-range loudspeaker performance in a smaller, more affordable form factor that fits easily into smaller and medium-sized rooms.”
 
All the drivers in the FR10 are custom-designed from the ground up. The 8-inch planar ribbon midrange and 2.5-inch planar ribbon tweeter employ a push-pull design with an identical symmetrical motor structure on either side of their driver diaphragms. This inherently linear configuration provides lower distortion than conventional single-sided magnet structures, along with higher efficiency.
 
The midrange and high-frequency drivers employ high-strength magnets and diaphragms made from Teonex® film, a thin, highly stable material that provides exceptional transient response and resolution, with a fast, clean decay. The drivers are housed in a sealed sub-enclosure to ensure maximum clarity and freedom from internal cabinet colorations.
 
The PS Audio aspen FR10 utilizes dual 6.5-inch cast-frame woofers with a non-woven carbon fiber PMI foam sandwich cone, for an articulate response that complements the speed and transparency of the planar-magnetic midrange and high-frequency drivers. The woofers utilize a split magnetic gap with dual copper shorting rings and have a large 3/4-inch peak-to-peak linear excursion for low distortion and dynamically responsive bass output. The woofers are augmented by three flat-piston carbon fiber passive radiators. The FR10 offers a wide range frequency response from 32 Hz – 20 kHz (- 6 dB, half-space; 25 Hz – 6 dB in-room).
 
The FR10’s slim enclosure measures 41.5 inches high by 8 inches wide (11.75 inches wide with its stand) by 16.25 inches deep. It’s available in a striking new matte finish in either black or white and comes with magnetically detachable grilles. The Aspen FR10’s room-friendly design makes it easy to set up and enjoy, and the FR10 comes with a handy setup booklet and CD to get the most out of the speaker. The FR10 has a visually distinctive “floating” appearance, with a curved bottom and an anodized aluminum base that is supplied with mounting feet that can be used with either removable stainless-steel spikes or a soft rubber foot underneath.

The Aspen FR10 delivers remarkable loudspeaker performance in every respect, with authoritative bass, an inviting midrange, smooth, extended highs, wide dynamic range, and palpable imaging on a wide and deep soundstage. It’s sure to thrill even the most demanding audiophiles and music aficionados.

Aspen FR10 Features at a Glance:
 

  • Enclosure type: sealed upper midrange/tweeter module and lower cabinet for the woofers and passive radiators
  • High-frequency transducer: 2.5-inch planar magnetic ribbon tweeter with Teonex diaphragm
  • Mid-frequency transducer: 8-inch planar magnetic ribbon midrange with Teonex diaphragm
  • Passive radiator: three 6 by nine-inch flat-piston carbon fiber
  • Woofer: dual 6.5-inch cast-frame, non-woven carbon fiber PMI foam sandwich cone
  • Thermoset resin fiberglass-composite woofer baffle
  • Magnetically-attached grille
  • Computer-optimized custom crossover with premium film capacitors and air-core inductors
  • Polished stainless-steel spikes with soft rubber feet enable a variety of mounting options
  • Frequency Response: 32 Hz – 20 kHz (- 6 dB, half-space; 25 Hz – 6 dB in-room)
  • Crossover Frequency: 550 Hz, 1,750 Hz
  • Sensitivity: 86.5 dB
  • Nominal Impedance: 4 ohms (3.3 ohms minimum)
  • Recommended Amplifier Power: 50 – 125 watts
  • Dimensions: 41.5 x 11.75 x 16.25 inches with base
  • Weight: 75 lbs. (34.1 kg)         

Contact: Frank Doris / Public Relations
(631) 645-5668



WHERE the MUSIC BEAT meets the AUDIOPHILE ELITE !

Thank you for subscribing.

Something went wrong.

Leave a Comment